Policy RG-HS-01

Safe on site.

We work inside running plants. Nobody gets hurt, and nothing stops because of us.

Range policy RG-HS-01 · Issued 1 January 2026 · Reviewed every year.

PolicyRG-HS-01
RevisionA
Issued1 January 2026
Next review1 January 2027
OwnerOperations
Applies toEveryone Range sends to a site
00At a glance

Four rules that never bend.

1permit
Before any plant access
0touches
To a live process without written approval
Sameday
Incidents and near misses reported
0penalty
For stopping unsafe work
01Before we arrive

The work is planned before anyone drives to site.

Most site risk is removed at the desk. Every visit starts with a written scope and a plan the client has seen.

Scope agreed in writing

What we will look at, where, when and who from the client is responsible. Nothing outside the scope happens on the day.

Risk assessment and method statement

A short risk assessment and method statement for every visit, shared with the client before we arrive.

Induction and training

Each person completes the client’s site induction and any area training before their first visit.

Competent people only

We send people with the experience the area needs. New team members are always paired with someone who knows the site.

Emergency information

Everyone knows the site’s emergency number, muster point and nearest first aid before work starts.

02On site

The client’s rules come first.

Where a client rule is stricter than ours, theirs applies. Where ours is stricter, ours does.

Access

Permit before access

Nobody enters a plant area or opens a cabinet without the client’s permit, and an escort where the site requires one.

Passive first

We listen before we touch

Our work starts by observing traffic and reading what exists. Nothing that could affect a running process happens without written authorisation, an agreed window and a way back.

Operation

We never operate plant

Range people do not start, stop or change plant equipment. The client’s operators do, under their own procedures.

Isolation

Lockout is the client’s

Isolation and lockout follow the client’s procedure, and only their authorised people apply or remove them.

Housekeeping

Leave it as found

Cables, laptops and bags never block walkways or panels. We leave every area as we found it, and tell the client what we connected and removed.

Hazardous areas

Rated kit only

In classified or hazardous areas we use only equipment the client approves for that zone.

03Protective equipment

The right PPE for the area, every time.

Range provides it. The client’s area rules decide what is worn.

Safety boots

On every site visit, every area.

Hard hat

In plant areas, and wherever the site requires it.

High-visibility clothing

Wherever there are vehicles, cranes or moving plant.

Eye protection

In process areas and near anything under pressure.

Hearing protection

In marked noise zones and near running machines.

Gloves

When handling cabinets, cable trays or sharp edges.

04Heat and fatigue

The UAE summer is a hazard of its own.

Plan around the heat

In summer we plan outdoor work for the cooler hours and follow the UAE midday break for outdoor work.

Water and rest

Water, shade and rest breaks are planned into every site day, not left to chance.

Reasonable hours

Site days are planned so nobody works tired. Long shifts are followed by proper rest.

Driving

Long drives to remote sites are planned with breaks. Nobody drives straight after a night shift.

Fit for work

Rested, well and never under the influence of alcohol or drugs.

05Stop work

Anyone from Range can stop the job.

Nobody is ever penalised for stopping work they believe is unsafe.

  1. Stop

    Pause the task the moment something looks unsafe.

  2. Make it safe

    Step back. Never touch the process to make it safe; that is the operator’s job.

  3. Tell the site

    Tell the client’s site contact straight away.

  4. Tell Range

    Call Range Operations the same day.

  5. Restart when cleared

    Work starts again only when the client and Range agree it is safe.

06Incidents and near misses

Every one is reported and learned from.

  1. Report

    To the client and Range Operations the same day.

  2. Record

    What happened, where, who was involved and what was done.

  3. Investigate

    We find the cause, not someone to blame.

  4. Share

    Lessons go to the client and the whole Range team.

  5. Track

    Actions are tracked until they are closed.

07Who is responsible

Safety has a name against it.

RoleResponsibility
EveryoneFollows this policy and the site rules, wears the right PPE, and stops unsafe work.
Engagement leadPlans the visit, shares the risk assessment, checks inductions, and is the client’s first contact on the day.
OperationsProvides PPE and training, keeps the incident record, and reviews this policy every year.
Chief Executive OfficerOwns this policy and makes sure safety is never traded for speed or cost.
Range · Site safety

Nothing we do is worth an injury or an unplanned stop.

No shutdown. No lost production. No one hurt.